Hello all! I'm hoping I can get some help here!
I've searched old threads on the topic and tried everything suggested.
I have a grit blast robot with a R-30iA controller and an M-20iA robot. I work for a large aerospace company so the firewall on my work laptop is unchangeable. I got approved for a laptop with no company image on it, so I can do whatever I want to the firewall.
I have the iRVision operators manual and made all the changes it said in the manual. Trusted sites, sites to allow pop ups, the LAN settings, and I followed the EB that FANUC put out regarding R-30iA controllers and IE, adding the robot IP to the correct group policy. I also made sure IE is a trusted app in the firewall. I have V7 (robot is version 7.70) of the vision controls installed that I got from the MyFANUC portal. I am using Edge in IE mode.
I can get to the main FANUC homepage. All the options are there, but Vision Setup gets stuck at the Copying files, please wait page.
I'm thinking maybe cause the robot is V7.70, maybe V8 of the vision controls might work?
Any help with this would be greatly appreciated!!!