ERROR Z 217
RC 30/51
-
valkamar -
March 22, 2024 at 9:12 PM -
Thread is Unresolved
-
-
SkyeFire
March 22, 2024 at 9:14 PM Approved the thread. -
How to reinstall KUKA RC 30/51 robot in case of error Z 217
-
Reinstallation sequence of KUKA RC 30/51 robot with error Z 217
-
Posting the same question 3 times in 30 min? That is both rude, and a violation of forum rules.
You're also asking for information on a robot that has not been produced for over 40 years. The odds of anyone still knowing how to resolve this issue are very low.
-
Как да преинсталирам робот KUKA RC 30/51 в случай на грешка Z 217
-
why not do as instructed? did you read READ FIRST?
this is English forum so please use English, stop repeating the same thing and do not send details to moderators. their job is to not to solve your problem but to moderate content. therefore post your issues in the forum so everyone can see what your trouble is and try to help. also this way any tip or resolution of the problem will be accessible to others - which the whole point of using forum.
Quote from valkamar (private message)1. The robot has not been turned on for a very long time
2. When turning on, an orange light on the top left for low batteries /batteries are changed ONLY WHEN THE CONTROLLER IS ON/ do not turn off the power for at least 20 hours!
3. I made this mistake and lost the installed program, error Z 217 on the robot ENERGY STOP TWO RED LIGHTS TOP RIGHT
4.Reinstall; Old computer with komport, Win 95 ; Win95 the corresponding standard installation disk for connecting cable ........ and as far as I know,
further we are waiting for help.
-
Very sorry.
It's not intentional, it's out of ignorance!