Hello,
I have problem with profinet between S7-1200 and KR360 KSS 8.3.38.
installed softwares are :
BoardPackage 1.4
GripperSpotTech 4.0.7
Kuka.CPC 3.0.3
Kuka.NonAdmin 2.0.0
LoadDataDetrmination 6.2.2
Profinet KRC-Nexxt 3.2.4
SafeOperation 3.2.0
UserTech 3.3.5
On Kuka KRC 4 is instaled Profinet KRC - Nexxt 3.2.4.
Which driver to choose from DTM selection on WorkVisual 4.0 .
I unable to find "Profinet KRC - Nexxt 3.2.4" in PROFINET I/O.
X11 is different, maybe is not safety, and also these ones are missing "safety gates ", "External E STOP" and etc in electrical circuit.
I tried to connect with WorkVisual 6.0 but unable to find "KUKA.NonAdmin" in d\kuka_opt\.
Thank you