Roboguide

  • I have never used roboguide before. I have a 30-day trial.


    For the first time, I will be installing and programming a Fanuc S-12 with an R-J2 Mate CONTROLLER (LR ARC TOOL). I have installed them before, (Set them and wired them up and tested operation by using the pendant). This time I will be doing everything, in addition to installing it. It will be used as a mechanical press tending robot, simply loading a part onto a die and operating the press in the place of an operator.


    Does anyone out there have any completed Robotguide cell files? (*.frw). It would be nice to see a completed cell. I cannot find any sample cells in the software from Fanuc.

    Roy Costa



    Motor City Stamping, Inc.


    47783 Gratiot Ave, Chesterfield, MI 48051


    Controls Systems Engineer


    http://www.mcstamp.com/

  • Fubini

    Approved the thread.
  • PDL,


    I know, I have a really old robot, but it will do for the project I am using it for. I would be happy with anything close.


    Do you know the dirctory where the sample programs are?

    Roy Costa



    Motor City Stamping, Inc.


    47783 Gratiot Ave, Chesterfield, MI 48051


    Controls Systems Engineer


    http://www.mcstamp.com/

  • Thanks SkeFire,


    There was no folder in that directory called Sample Workcells. Would you mind zipping upo that folder and emailing to me?


    I will remove the personal data, thanks.

    Roy Costa



    Motor City Stamping, Inc.


    47783 Gratiot Ave, Chesterfield, MI 48051


    Controls Systems Engineer


    http://www.mcstamp.com/

  • Adam Willea
    Hey guys! I'm a Robotics Engineer with FANUC America. I've been programming robots since 2009 and have picked up several useful tips & tricks, so I decided to…
    www.youtube.com

    Shane Welcher
    Follow us if you want to learn PLC Programming, HMI Programming, Simulating Code, Using RLogix 5000 Emulator, FactoryTalk View Studio, & HMI programming. Key…
    www.youtube.com

    Timothy Mehring
    Thank you for coming to my channel! Unlike other software programs where there are a plethora of videos and tutorials out there, Fanuc's Roboguide remains a…
    www.youtube.com

    Elite Automation
    In this Youtube Channel, you will learn different technical skills relevant to the industrial automation industry. We teach topics such as Electrical…
    www.youtube.com

    This should provide great examples

  • I have never used roboguide before. I have a 30-day trial.


    For the first time, I will be installing and programming a Fanuc S-12 with an R-J2 Mate CONTROLLER (LR ARC TOOL). I have installed them before, (Set them and wired them up and tested operation by using the pendant). This time I will be doing everything, in addition to installing it. It will be used as a mechanical press tending robot, simply loading a part onto a die and operating the press in the place of an operator.


    Does anyone out there have any completed Robotguide cell files? (*.frw). It would be nice to see a completed cell. I cannot find any sample cells in the software from Fanuc.

    Are you sure that S-12 is a mate controller? I've never seen a S-12 LRmate

Advertising from our partners