Roboguide

Are you looking for a RJ2 specific RoboGuide cell?

RoboGuide only supports back to controller version 5.3, which is for R-J3 controllers.

RG comes with several sample workcells.

Quote from thegreektekman

Do you know the dirctory where the sample programs are?

on my computer, it's in C:\programdata\Fanuc\Sample Workcells\

Also, you may not want to put so much personal detail in your sig. If nothing else, it's begging for email and phone spam.

Adam Willea

Hey guys! I'm a Robotics Engineer with FANUC America. I've been programming robots since 2009 and have picked up several useful tips & tricks, so I decided to…

www.youtube.com

Shane Welcher

Follow us if you want to learn PLC Programming, HMI Programming, Simulating Code, Using RLogix 5000 Emulator, FactoryTalk View Studio, & HMI programming. Key…

www.youtube.com

Timothy Mehring

Thank you for coming to my channel! Unlike other software programs where there are a plethora of videos and tutorials out there, Fanuc's Roboguide remains a…

www.youtube.com

Elite Automation

In this Youtube Channel, you will learn different technical skills relevant to the industrial automation industry. We teach topics such as Electrical…

www.youtube.com

This should provide great examples

Too big to fit. Also, on closer examination, all the Samples are for various Pro packages, which probably won't fit your use case.

I did, however, find an old generic handling training cell. You'll have to delete the .zip off the end to get the .rgx, the forum doesn't support the .rgx file extension.

Quote from thegreektekman

I have never used roboguide before. I have a 30-day trial.

For the first time, I will be installing and programming a Fanuc S-12 with an R-J2 Mate CONTROLLER (LR ARC TOOL). I have installed them before, (Set them and wired them up and tested operation by using the pendant). This time I will be doing everything, in addition to installing it. It will be used as a mechanical press tending robot, simply loading a part onto a die and operating the press in the place of an operator.

Does anyone out there have any completed Robotguide cell files? (*.frw). It would be nice to see a completed cell. I cannot find any sample cells in the software from Fanuc.

Are you sure that S-12 is a mate controller? I've never seen a S-12 LRmate

That should have a A or B cabinet not a Mate

M6 or M16 is closest thing to S-12. Rj2 is not supported in roboguide.