Hello,
I’m trying to set up a Profinet network, and I’m encountering the following error: “KSS11012 - The configured device differs from the real device slot 1, subslot 1.” This error occurs when I configure the input and output modules in WorkVisual.
What could be my issue? Initially, it seems like I’ve configured everything correctly. The IP is assigned correctly on the device and in WorkVisual. Furthermore, if I don’t configure the modules, I don’t get an error, and there’s communication. I’ve tried several GSD files, but the error persists.
Relevant details:
Robot:
• My equipment is a KRC4 v8.3.37
• Profinet KRC-Nexxt v3.3.1
• IP: 192.168.1.102
Module 1:
• X20if10e3-1
• Not functioning
Module 2:
• Wago 750-377
• Functioning properly
WorkVisual v6.0.24
KUKA Profinet MS v6.0.3.32
Profinet KRC-Nexxt v3.3.1.8
I’m attaching some images.