Hey.
I am currently welding some plates of thickness 3mm, and there come 15 plains on thickness 10mm.
So I have problem. We get plates and this straight(plains or ehat are they called in english) from buyer.
We need to weld them to plate and then post-production.
We became plates which are 2000mm*1800mm but this straight, are constant in lenght and height, but they vary from 18-19.5mm in widht.
So i have problem welding the.
One plate take about 1hour and half of welding, and one hour off preparation and so on. we have at least 150 plate to make.
So I want to use tast.
I have current arroung 170-180A, vellocity off welding is 42cm/min.
What I have to done in Tast to make sure my robot will weld straight?
I dont know any of this oarameters in Track.
Can anybody send me some approximatelly work?