Hi
Controller KRC-2
Robot KR210-2-F 2000
Problem started with the batteries not getting changed.
The original alarms included needing to master the axis.
I have changed the batteries and used a EMT to remaster the axis.
I do however still have this message. I searched for it in the forum
and got a couple hints that make sense, the clocks do not match.
From what I understood was to go to CONFIG then Services.
I do not have Services.
What should the procedure be for my vintage controller?
Thank you for the help
RDT Data of RDC and Hard Disk inconsistent! Check robot data!
-
9566317 -
May 18, 2016 at 6:04 PM -
Thread is marked as Resolved.
-
-
KSS version? Controller edition?
You probably need to log in as Expert or Administrator to get access to services, then select which source (RDC or hard drive) has the correct data (robot serial number, hour meter, etc) to overwrite the other.
-
That was the trick, Needed to log in as Administrator.
Thank you -
Hi, I have the exact same error message, but I don't understand what it means to "go to CONFIG"...
There's a "Configuration" menu, but there's no "Service" sub-menu in there, even logged-in as administrator.
A bit of context would help me here.
Thanks
-
menu options have changed from one KSS version to another. so if you need detailed help, it has to start with you - try to read and provide some details.
-
Hereafter, my system details and the error message.
-
User login to expert or administrator and go to Setup->Robot Data. Question will appear and select correct data source RDW or HDD. This will synchronization controller data HDD to RDW or vice versa.
-
Thanks !
-
User login to expert or administrator and go to Setup->Robot Data. Question will appear and select correct data source RDW or HDD. This will synchronization controller data HDD to RDW or vice versa.
Is there any default password for logging in?
-
log in as what?
-
As admin or expert
-
yes, there is! use search function - was already mentioned couple of time?
-
yes, there is! use search function - was already mentioned couple of time?
I am really sorry for that. I have to manage many other staff and I did not search for password. Thank you for your time and answering to me. Regards.
-
Is there any default password for logging in?
kuka
all lowercase, so ensure the CAPS LOCK is not on.