Recently I have tried to copy the content of original Kuka HDD disk to new PATA disk.
Controller is KR C2 edition 05, and soft version i V5.4.7 build 66.
I managed to make an image backup of HDD drive using Macrium Reflect software.
I soldered appropiate pins on PATA disk to set disk as Master (there were too little space between disk and adapter to attach a jumper), and attached the PATA -> SATA converter.
Then, I formatted PATA disk, and restored disk image onto PATA drive also with help of Macrium Reflect software.
After I plug in PATA disk and turn on the controller, disk is recognized in BIOS - disk name "SQF-P25M4-16G-P9C" is visible on hardware list.
So far, so good.
After that, "Windows Resume Loader" window appears, and when I choose "Continue with system resume", the next screen "Resuming Windows..." appears.
When the loading bar is full, the screen becomes all-black, and Windows is not starting up.
At this time, the red diode on adapter stops blinking, which I assume means that drive in no longer processing data.
In other threads I saw some users suggested using other software for disk cloning (for example Acronis, or Norton11) - I haven't tried them yet, because last time I couldn't stop the controller and cause more downtime.
Maybe you guys had similar issue in the past and could provide me with some ideas for me to try? I would greatly appreciate your help.