Wire feed question

DbdInvasion · October 14, 2021 at 10:38 PM

Now this is a stupid question that has been plaguing me for some time.

We have a new 120ic and everything was going great until the hose from the wire barrel to the wire feed got severed...

For the life of me I can't find the right length or anything to get it to pull right.

any suggestions would be amazing.

scotty · October 18, 2021 at 3:11 PM

What is the problem to order same one from the manufacturer?

swilliams13 · October 18, 2021 at 3:16 PM

You can get bulk conduit from wire wizard. They make pretty good quality stuff:

https://www.wire-wizard.com/product/polymer-conduit-bulk/

Additionally, you can buy quick disconnect adapters for your drum and for your feeder. unless you are pulling around any tight bends, this stuff lasts for quite awhile.

Wire feed question

Advertising from our partners

Anyware Robotics is hiring!

How to see your Job Posting (search or recruit) here in Robot-Forum.com

Similar Threads

Robot welding help for absolute beginner

ESAB AristoRob 500

Setup of KUKA KRC2 - wire feeder - highyag optics

Yasnac xrc sk16x getting it to arc having issues

I/O PROBLEMS

Remote wire feed I/O

Weld Parameters

Integration of Colombo Spindles

Welding robot communication problem