Remote wire feed I/O

We have a cell with 2 arcmate 100ib r-j3ib robots with Miller auto access 300 welders/feeders and a single fixture. I have a button on the HMI to jog wire for when the operator has to do a tip change, this button is attached to DI 8 and the inch wire foward and feed foward both use WO 4. I configured the remote feed foward (in the weld input screen) to use DI 8 but cannot get it activate the WO 4 when pressing the button. We have another cell with an r30ia and r3oib, but with lincoln welders and it works fine(they use DO's instead of WO). Any help on how i can get this setup to work would be greatly appreciated!

Thanks in advance

Yes

Well I found a different solution...I created a macro that pulses WO 4 and is activated by DI 8, and seems to be working