The green power led on the front of the cabinet flashes but the red stays on constantly. And the KCP gives me the error pictured. Cuold you guys be so kind as to point me in the right direction??
No connection to KRC possible KRC 4
-
WarDamRobot205 -
January 15, 2021 at 2:25 PM -
Thread is Unresolved
-
-
Green light fleshing means controller is trying to boot but does not complete. When boot is complete light is solid...
SmartPad can only communicate with controller that has booted, hence the message.
Shut controller down, connect monitor directly to controller PC, then power up.
-
Awesome, Thank you!
-
Hello, I have the same problem. When connecting the robot to the controller, it tells me that it is not connected. Could you please explain to me how to fix it? Thank you.
-
inside controller is PC and few other things. unplug smartPad, connect monitor to PC directly and then powerup...