application taf.exe encountered a serious error and must shut down.
Hello everyone, I have this error on my flexpendant. Could it be that giving it a firmware reset does not work?
Posts by Nicolas Romero
-
-
Code
Good afternoon everyone, I need the mechanical maintenance manual for ROBOT FANUC M410IC/185 , if someone has it so that they can send it to me as a courtesy
-
Pues si claro que hay algo muy raro tengo un video de el otro robot donde en WORLD el eje 6 mantiene el movimiento linear.
si me puedes pasar un numero de whattssap te puedo reenviar el video de los dos robots pra que veas la diferencia de un robot para el otro y es bien grande la diferencia por eso el cliente reclama.
-
para mi no , mas el cliente esta reclamando de este defecto ya que el tiene otro robo igual y en WORD el eje 6 no gira.
algo que seria solo posible con alguna variable activa.
-
tienes razon donde el no va a rotar es en la coordenada tool y en la coordenada tool tambien esta girando
-
Buenos dias a todos. Tuvimos que reparar el reductor del eje 2 de este robot , percibimos que realmente los otros reductores estavan con mucha contaminacion de grasa vieja. todos fueron lavados e montados nuevamente , el robot funciona sin falla ninguna el unico problema es que ah perdido el tcp ya que el eje 6 cuando se intenta hacer un movimiento linear en la coordinada WORD el comienza a rotar. ya se instalo nuevamente el backup de imagem y all of abouve tambien ya se masterizo nuevamente y esto no resolvio el problema. Algum comentario o consejo respecto a este problema ?
-
only axis 2 gerbox han been changed
axis 6 is the one that is not following the linear movement in the word coordinate
today the robot customer informs me thar they have never mastered the robot , I come from factory mastered with the fixture position master method
-
Code
has already been done in the single axis master method and continues with the problem -
Code
A broken gearbox was replaced with a new gearbox. after that the axis 6 in the word coordinate does not follow a linear movement, that is, it does not start to rotate. it should be straight without moving. -
Code
Display Morethe wave generator on axis 2 breaks, the gear unit on axis 2 was replaced and the other gear units were disassembled. after the assembly is giving the problem that it does not follow the linear movement in the word coordinate. foi masterizado comforme o manual e continua com o problema. robo nao utiliza tcp. does anyone already experience this problem? -
Goodnight friend.
I'm having problems with a customer who changes the box size.
when the robot is going to palletize the boxes it is loosening them before positioning.
what would be the best way to adjust this change in box size for the robot?
-
hola amigos soy de Torreòn Coahuila Mexico, cualquier 
problema o asesoria que necesiten referente a Fanuc como pueden Ser CNC y Robots los puedo ayudar con todo gusto, tambien conosco de otras marcas como Cincinnati Milacron, Fadal, ABB y en fin... si leen esto pues mandenme un mail con sus 
comentarios o escriban en este foro y les ayudare [email protected]Saludos
aun activo para algunas dudas ?
-
Buenas tardes en este caso tienes que actualizar la maquina de soldadura linconl
-
I guess MH is material handling and AW is arc welding
A05B-2255-C101#SGL , the letters SGL are of wich application ?
-
I believe the text on the hard keys would be the only difference: "Tool 1" "Tool 2" rather than "Wire +" "Wire -" ..?
each robot software has IO dedicates to application this welding would not be compatible
-
A05B-2255-C101#SGL , the letters SGL are of wich application ?
-
Good mornign , here in Brazil FANUC does not pass this information , I having problems with a TP AO5B-2255C101#EMH and wanted to know if this model would be compatible A05B-2255-C101#EAW
THANK YOU..
-
Good morning everyone.
I have a problem with the teach pendant fanuc , he does not start the software.
Someone already had this problem any help to solve it ?
-
Code
have any installation manual option ? -
I need help for this fault !!!
Erro 71397
