It's me again.
I had confirmation by FANUC, these two different teach pendants are NOT switchable. Thought I would share with you in case someone needs the info 
Good mornign , here in Brazil FANUC does not pass this information , I having problems with a TP AO5B-2255C101#EMH and wanted to know if this model would be compatible A05B-2255-C101#EAW
THANK YOU..
I guess MH is material handling and AW is arc welding
I guess MH is material handling and AW is arc welding
I believe the text on the hard keys would be the only difference: "Tool 1" "Tool 2" rather than "Wire +" "Wire -" ..?
A05B-2255-C101#SGL , the letters SGL are of wich application ?
I believe the text on the hard keys would be the only difference: "Tool 1" "Tool 2" rather than "Wire +" "Wire -" ..?
each robot software has IO dedicates to application this welding would not be compatible
I guess MH is material handling and AW is arc welding
A05B-2255-C101#SGL , the letters SGL are of wich application ?
each robot software has IO dedicates to application this welding would not be compatible
Teach pendant does not run different software based on application. That is independent to the robot controller. I've swapped MH pendants with Arc pendants before. Whether or not the product codes line up with those pendants, I do not know.
You need to be a member in order to leave a comment
