We have a Vr-008. When creating a new program there's an option for mech 1 which controls the robot and mech 7, which controls G4+G5+G6. But I still can't control the table positioning, rotate 90 and 180. External axis is greyed out. Tried swapping memory from an identical robot but still can't do anything with the table position or even sweep table A and B. Why am I not able to rotate the table? How do I go about setting up G5 and G6?
External Axis Help!
-
Robotics614 -
April 29, 2024 at 10:26 PM -
Thread is Unresolved
-
-
95devils
April 29, 2024 at 10:39 PM Approved the thread. -
From what I understand mechanism 1 is your robot but the rest of your mechanisms is your G axis's. Dont quote me on that, still learning!
-
After checking on this yesterday. Mech 1 is G5 and Mech 2 is G6. Mech 0 is your robot. Mech 0 will always be default. Which you can not change without having a certain user name and password to get into that side of the settings.