Good morning to everyone
I need your help
In a used Robot, the sys digital I/O are defined (normally) in this case the STOPMESS is not (or deleted or changed).
How can I reassign Output nº2 to STOPMESS (see attached photo)
Thanks
KRC2 - Ed05
Good morning to everyone
I need your help
In a used Robot, the sys digital I/O are defined (normally) in this case the STOPMESS is not (or deleted or changed).
How can I reassign Output nº2 to STOPMESS (see attached photo)
Thanks
KRC2 - Ed05
read the manual and follow the instructions.
login as expert, go to menu
CONFIGURE 0-1
(Configure > I/O > Automatic External)