Analog Input Wiring
-
jariuscs -
October 5, 2022 at 12:42 AM -
Thread is Resolved
-
Update on this issue.
I got a new 16-bit card and also a 12-bit card.
the new 16-bit card acts the same way as the previous one, however the 12-bit works perfectly! It starts at 880 and ends at 220, the count doesn't reset multiple times through the sensors range.
So now I'm really curious, why this is happening with the 16-bit version card. Does the robot know its the 16 bit card as opposed to the 12?
turns out the 12 bit card gives me enough resolution, so I will keep that for the project.
-
- Best Answer
I'm a little late but this is probably the issue. You need to change some variables to get the 16bit card to work correctly.
-
I'm a little late but this is probably the issue. You need to change some variables to get the 16bit card to work correctly.
That looks like a solution to this issue. Thanks for posting it.
What manual did you find that in?
-
What manual did you find that in?
It is part of the basic operation manual, e.g. B-83284EN/10. See chapter 3.1.3 Analog I/O.
Advertising from our partners
