Hello my name is Francesco,
I’m new on the forum.
I want increase the numbers of PR on R30iB- mate Fanuc controller.
Right now I have only 100 PR available.
Can some help me on it?
Thank you so much
Francesco
Hello my name is Francesco,
I’m new on the forum.
I want increase the numbers of PR on R30iB- mate Fanuc controller.
Right now I have only 100 PR available.
Can some help me on it?
Thank you so much
Francesco
Hello Francesco.
Go to controlled start, then MENU -> 0 (NEXT) -> 1 PROGRAM SETUP.
Here there is a posibility to change the quantity of PR's.
I tried but I can’t find program setup on my menu?
Do you know why?
Thanks
Are you sure you rebooted it into a controlled start?
PROGRAM SETUP for sure is in controlled start, so as HawkME said - probably you're not there.
To be sure - what do you have in the field "xxxxx" when pressing:
MENU -> 0 (--NEXT--) -> 1 xxxxx
This will show us whether you're in controlled start or not.
Thank you guys for your help.
I don’t have much familiarity with Fanuc controller.
So, if I understood what u said I need shut off the controller then after restarted push menu then 0 (next) then 1, It’s correct ?
Thanks
No,
Turn it off
Press F1 and F5 ant the same time , keep pressing and turn power on
You will see the robot rebooting on a black screen
Keep holding until you see ( I don't remember exactly) but you will see the word COMPLETED
Follow HawkME instructions
Tip: Search forum for Controlled start
Thank you Fabian,
I did and I increase the PR’s, but now I don’t know how come back and restart the controller on regular screen ( operator interface)
Can u help me please ?
I dont remember exactly but you are looking for the words COLD START. press the FUNCTION key and see it
Thank you again I found it was in Function.
Thanks again