Hello Everybody,
Please I would like to know if I can do a configuration for Robot mounted Camera in Roboguide, is it possible ??
Thanks,
Molesayed
Hello Everybody,
Please I would like to know if I can do a configuration for Robot mounted Camera in Roboguide, is it possible ??
Thanks,
Molesayed
Click on Not Selected and then click on YES
Fabian,
Please regarding to roboguide how can I attach camera to the body of the robot.
Thanks,
Moelsayed
On the tree, go to the very end to Sensor Units and create a camera. I think I restarted after that
Fabian
I can't be able to attach camera to the robot body roboguide its seems like no way for that.
So my alternative solution I will do all configuration by using real robot and camera on site.
So do we have too many differences between fixed camera configuration and robot mounted camera or both like each other.
Thanks
Moelsayed
Moelsayed,
the difference in the process can be from the way you calibrate the camera, and also to make sure the robot position still in the same position when snaping or taking picture of your workpiece.
Are you sure you have R685 2D Pkg install ? try to serialize the robot and check what you have under iRV.....