Gentlemen, I request the XS2 layout. follows the image of the female connector.
Layout XS2 VKRC1
-
silvanofilho -
January 19, 2021 at 12:43 PM -
Thread is Unresolved
-
-
I don't have the scheme, but have the pinout.
Plug A - female
Plug B - male
A1-B1
A2-B2
A3- B1
A4-B3
B4-B5
B6-B12
B8 e B9 = T2
B7, B8 e B9 = T1
-
Quais destes pinos devo colocar jumper?? está bem diferente teu esquema.
-
There is no difference,
For VKRC1 You don't need to wire all plugs, just A and B.
-
I could mark in the image how the jumpers would look:
B8 and B9 = T2B7, B8 and B9 = T1
please
-
ok, go ahead and mark ...
-
this is what pinouts look like, some pin numbers are not shown due limited space but as always there is a simple pattern to it. on first loot A and B for example appear to be mirrored but this is not true because they are different gender.
-
maybe this helps too, assuming we are talking about VKRC1