Saudações. Srs. busco fornecedores peças e fabricantes de cabos para robôs kuka, que possamos imprimir o nome da empresa nos cabos. Aguardo seu retorno. +5547996061268
Posts by silvanofilho
-
-
Code
Here is another image of the reducer -
Code
Greetings. Sirs, I need the datasheet of a reducer with measures: 180mm high by 330mm in diameter - from the external shaft. His data can be found in the attached images. Kuka didn't recognize this reducer, I hope some professional can help me. I need to know the amount of oil that goes in it. -
Greetings. I'm doing the TCP of the tool, but the result is very high, I have already mastered and checked it, even so the error is very high, opinions? Grateful. -
Code
Greetings. When testing image 8.2.28 and after passing the project to it, this error appeared that I cannot confirm. -
Greetings. I need the kuka <edited> -
Code
does anyone have the manual to know what type of oil goes in the compensator of the robot KR200 / krc2?Code -
Code
Greetings gentlemen. I need to know which pieces are the following articles: 00-119-216 00-115-490 00-115-470 00-116-169 00-116-062. If you have the image of the piece to identify, it will be better. -
Code
Saudações robotistas. Não estou conseguindo eliminar essa falha que está destacada. -
I could mark in the image how the jumpers would look:
B8 and B9 = T2B7, B8 and B9 = T1
please
-
Code
Good afternoon, is it possible to transform VKRC1 into KRC1? What parts do I have to replace, what software do I have to install? Thanks.Code -
Quais destes pinos devo colocar jumper?? está bem diferente teu esquema.
-
Gentlemen, I request the XS2 layout. follows the image of the female connector. -
Code
Saudações. Como testar um LCD KRC2 sem o KPC e sem o gabinete KRC? Você pode me apontar um dispositivo de teste? -
There is a compatibility table between KPC motherboard and KSS, kUKA robots.? -
Porque o Robô kuka - KRC4 compact - só Funciona na Segunda vez Que eu ligo?
