I have Fanuc robot controller R30ib
do i need to pay for controller upgrade or some software to connect ethernet switch and take my robot data to internet
what is GPro EX??
I have Fanuc robot controller R30ib
do i need to pay for controller upgrade or some software to connect ethernet switch and take my robot data to internet
what is GPro EX??
The R30iB comes with a built in Web server where you can view data and a built in FTP server for free. What data are you trying to get access to?
Never heard of GPro Ex.
what is GPro EX??
GP Pro EX is the screen editor for Schneider Electric's Proface HMI.
The R30iB comes with a built in Web server where you can view data and a built in FTP server for free. What data are you trying to get access to?
Never heard of GPro Ex.
I want to connect ethernet switch to my robot to get register data, faults, input output etc.
I have a Mitsubishi PLC , what additional software or hardware i would need to do this?
Do you want to read this information with the PLC the whole time that it is running so it can control some process? Or do you just want to see the current values when you feel like it with for example a laptop that is connected to the robot?
Do you want to read this information with the PLC the whole time that it is running so it can control some process? Or do you just want to see the current values when you feel like it with for example a laptop that is connected to the robot?
Yes , let me know how i can connect my latpot to the controller and pull the data ?
On the robot
MENU, SETUP, Host Comm, TCP/IP
cursor beside Port #1 IP addr, press enter and write the IP address. 192.168.0.11 for example
On the laptop
Open Network & Internet settings, Change adapter options
Select the Ethernet port you are going to use, double click on it
Select properties, select protocol TCP/IPv4, open the properties and select Use the following IP address
Write something like 192.168.0.12
DONE, dont forget the 255.255.255.0 on both devices
The using Internet Explorer, type on the URL space 192.168.0.11