Hello all, i have a little problem with a festo I/O device.
The robot dont get the information about the digital I/O, and when i go to reconfigure device i get the massage error reconfigure DN2DRV. The man that sell me this robot told me that the modul is a little bit slower than the robot it self, so when the robot is booting it dose not configure the device, and the solution is to somehow restart the windows and disconnect the connectors of the device, reconnect them, and then turn it on, start kuka cross again and reconfigure the device. After that i should work but it dose not. It worked 2 days ago and this morning its not working. Dose anyone have a idea what to do.?
Thanks to all, and sorry for bad English