Dear Sirs,
I have a new problem with a KUKA KRC2 cabinet.
Today, after switch in, the boot process stopped at the loading step ( on the screen: "LOADING" )
I tryed several times to switch in the robot again,but the result was the same. Stop at "LOADING..."
I changed the memory card, the result was also the same.
After them I installed the windows and KSS again, first time the boot process was succesfull, but by the second start ( cabinet off, cabinet on ) the problem came again.
If somebody have any idea, what is it, I would be grateful for the help.
Thanks a lot in advance.