Dear Robot-Forum.
this is my first time on this forum so if i make mistake please correct it.
i just started a new job and my first task is to get a:
FANUC LR MATE 200iC
up and running.
most to all of the electrical and logic wiring is complete (by previous user). it is using a:
I pendant, type: A05B-2518-C200#EMH
as a controller, and it will be hooked up to a Haas mini mill.
my question is:
how do you program the darnded thing. iv'e taken a look at the manual and done"endless"(so to speak)
variations on google searches as to how to program it.
i have been unable to find a manual or any other resource. i see there are system variables and it might be programmed in KAREL (pronounced 'care - L' ?).
but have been fruitless in finding info. (i know some python and C++ / C if useful for explanations)
is it programmed on the Pendant?
can i program on computer and just plug in a cf card/ usb - drive?
many thanks for any help,
TG-Techie