kuka released KUKA.Recovery_V3.0
KRC4 HDD Image without KUKA USB
-
s2007.ravi -
January 17, 2017 at 5:04 PM -
Thread is marked as Resolved.
-
-
kuka released KUKA.Recovery_V3.0Anything special or critical about it? Does it run on a KSR stick, or can it be run via other means?
-
hi, SkyeFire
you could download it from http://www.update-recovery-usb.kuka-robotics.com and check it .
-
Use snapshot or Hiren's Boot CD.
I have used Hiren's boot CD for creating HDD image and snapshot for images of CF cards.
Hiren's boot CD provide single image of all partitions while snapshot provides separate partitions image.I have also worked on USB stick (with simple USB), In next 2 or 3 months I will test it and will give my feedback for alternate USB stick.
-
Use snapshot or Hiren's Boot CD.
I have used Hiren's boot CD for creating HDD image and snapshot for images of CF cards.
Hiren's boot CD provide single image of all partitions while snapshot provides separate partitions image.I have also worked on USB stick (with simple USB), In next 2 or 3 months I will test it and will give my feedback for alternate USB stick.
KRC2 or KRC4?
-
Quote
KRC2 or KRC4?
it was KRC2. I had seen one guy using another software for KRC4. I will contact him and update you about it.
-
it was KRC2. I had seen one guy using another software for KRC4. I will contact him and update you about it.
Yes please. It is going to help lot of people.
-
dear RS,
he confirmed me that he uses snapshot for KRC4. he creates and restores image via this software at KRC4. -
dear RS,
he confirmed me that he uses snapshot for KRC4. he creates and restores image via this software at KRC4.Great and he did this without removing the Hard-disk from the controller and just by installing the snapshot on KRC4 and performed the steps as explained here:
http://www.drivesnapshot.de/en/backups.htm
Am I right?
Thanks
-
Great and he did this without removing the Hard-disk from the controller and just by installing the snapshot on KRC4 and performed the steps as explained here:
http://www.drivesnapshot.de/en/backups.htm
Am I right?
Thanks
Hard disk should be removed. without unpluging, is it possible without USB Stick?
I hope to complete my test of using common USB for replacement of KUKA USB by the end of this month. -
I used Acronis after I took the HDD out, but it should be possible to do it in the running state using Acronis. I did that on KRC2 before.
-
Hello,
I just have problem with HDD( SSD) of KRC4- palleting robot. After power shutdown, PC controller can not start up with error Hard drive error ( led 5)
I restore HDD backup image by Acronics true image 2013 with new SATA 2.5" HD then I can solve this problem so We can create Acronics true image 2013 to backup & restore HDD for KRC4.Regards,
-
Hello everyone,
Can anyone recommend a program for me besides the ones mentioned earlier, that can be used to make a copy of the HDD from a KRC4? Did the same program work for restoration as well?
Regards
-
Hi everyone.We have KUKA KRC4 and KRC2 Housing case , Kable, Keypad ,Touchscreen.
-