Figured it out w/o sarcastic assistance!
Please remove from forum
Figured it out w/o sarcastic assistance!
Please remove from forum
Well, since you included no information about what welding software the robot is running, what standard this robot is configured to, or the I/O configuration of the robot and water saver... no, no ideas at all.
how to simulate the kuka robot with Aalen Bradley plc
gotta love ignorance of some users...
I'm going to take a second here and point out that I for one am not going to delete a post simply because skyefire replied that you didn't give any information on your equipment, firmware, etc but expected us to stop what he's doing and pick an answer out of thin air. I don't Always agree with him but I will say that he for years has been here dedicatedly to help others. If you don't agree, why don't you try he largest programming forum stack overflow with a question containing the same amount of info and I'll guarantee that they will flame you and then they delete your account. I'm not trying to be harsh, I'm just stating that you try looking at it from our point of view