Hello ,
im trying to connect a external axis on:
-kr2210 s c2 FLR ZH210
-kss 5.5.16
im using:
-KSD1-16
-servomotor art no : 0000115925
from the power cable XM5 of the external motor there 's two cables (blue pin5 , and red pin 4)
and the cables 1,2,3 (white) attached to inferior part of the KSD
where its the correct posistion of these two cables? (red , blue)
also i have a jumpers on a KSD
1 and 2
4, 5 and 6
these jumpers are correct?
attached found image details
originally this positioner was connected with a KR16 krc2 kss 5.5.16, but there was a lot errors on E1 and constantly emergency stop
Have a nice day