Hi all, this is my first post (and forgive my English),
I bought a KUKA arm KR150 of second hand, --very economical, without any electrical controllers--, and I need in replace the original servo motors of 600v by others (230v)... but ... before doing so, I ask:
Will I be able to run the original servo motors with a 230v driver / 2Kw?
I plan to use the Telemecanique driver LXM23AU15M3X for run the original Kuka servo motor (600v / 2.8kw / 5.7Amp)
http://www.schneider-electric.com/products/us/en…lexium-23-plus/
Will it work?
The best idea would be to replace the entire motors to 230V, but it's my first time (I am very honest here) and I wonder if I can avoid further purchases.
Note: The KUKA KR150 be used with loads highs of 20 kilos, to teach basic robotic to young students, and I think the original servo motors are designed for extreme loads, it will not be my case, and I need to replace (or not? ) to use the robot in my little school-workshop with 230v on grid.
I hope opinions.
Many thanks.