Hi all,
I'm adding three external axis to a KRC4 small size 2 / KR8 with KSS 8.6.6.
KPP 600-20 - 198259
KSP 600 3x40 - 198268
Connecting power shows the blinking led for 'intermediate circuit voltage out of permitted range'.
When trying to enable the drives I'm getting a Mains Power Failure (supply). However this only happens with the external axis configuration active and both $SUPPLY_VOLTAGE are set to 400V.
I've got a feeling this is a damaged KPP (no visible burn marks on the boards) or a firmware issue (which I can't seem to update).
Any help would be greatly appreciated.