I just tried to answer your post #1
panic mode and Skyfire made some suggestions.
Now it is your part again to figure out what you actually want or need.
I just tried to answer your post #1
panic mode and Skyfire made some suggestions.
Now it is your part again to figure out what you actually want or need.
one if i want to use onboard ethernet and second if i will buy a network card ,is that right?
No, the question is, what does your application require? A question you have not yet answered.
For RSI, the secondary ethernet card is strongly recommended. For anything else, the built-in ethernet port is sufficient.
In fact, if you were to use VarProxy, I believe that cannot use the secondary ethernet card, only the built-in one.
No, the question is, what does your application require? A question you have not yet answered.
For RSI, the secondary ethernet card is strongly recommended. For anything else, the built-in ethernet port is sufficient.
In fact, if you were to use VarProxy, I believe that cannot use the secondary ethernet card, only the built-in one.
ok if i will use Kukavarproxy is there any links to know how to use it and what is the configuration i should do?
Kukavarproxy works fine with secondary networkcard.
Get a PCI networkcard, NOT a PCI express.
Works with KRC2 and KRC2-ED05.
Onboard network port on ED05 (Fujitsu board) can be buggy sometimes with Kukavarproxy.