I'm find out Battery types for 1KA board

saberlars · October 19, 2023 at 11:35 AM

Controller : D22G-A001, D22F-D001
Manipulator : FS030 * 2ea

I'm try to battery replacement.

Refer to "90206-1034DEG" Manual's "4.8 Replacement procedure for batteries" chapter..

described 1KA board at controller.

1HG or 1FG board is Manipulator. Already fund part number "50750-1018" Lithium 3.6V battery.

I have a question about the battery for the 1KA board.

Does anyone know which type it requires? I think it might be a CR2032, but I haven't had a chance to open the controller."

**kwakisaki** · October 19, 2023 at 1:12 PM

Legacy Kawasaki Batteries are natively Maxell ER17/50.

They can be purchased as:

a. double cell (Encoder or C controller RAM).

b. single cell (D controller RAM 1KA/1RA).

E Series controllers and upwards at the moment use CR2025 button cell only for RTC Bios, as RAM is now flash so not volatile memory, so no battery backup required.

Just contact your nearest Kawasaki distributor and state you require a battery for 1KA or 1RA CPU and they will be able to facilitate.

Part no will probably be 60750-1013 for single cell RAM battery for 1KA/1RA.

saberlars · October 20, 2023 at 2:20 PM

1KA Board
Brand : Maxell
Type : ER17 / 50 (Single)

Voltage : 3.6V, 2750mAh

1FG Board

Brand : Maxell

Type : ER17 / 50 (Double parallel)

Voltage : 3.6V, 2750mAh *2

done!

**kwakisaki** · October 20, 2023 at 7:33 PM

FYI the dual cell is not in parallel.

If you split the package you will see they are individually wired.

I'm find out Battery types for 1KA board

Advertising from our partners

How to see your Job Posting (search or recruit) here in Robot-Forum.com