Hello all,
I dont know, what I do wrong, but I am not able to set profinet communication between Fanuc (R-30iB Mini Plus - CRX-25iA) using A05B-2600-S536 (V9.40.3) and Simatic S7-1200 (CPU 1215c).
I want to use Fanuc as device on profinet so I created "device1.zip"
XML
<?xml version="1.0" encoding="utf-8"?>
<Device>
<Module Slot="0" ID="0x00000300">
<Submodule API="0" Subslot="1" ID="0x00000001" Inputlen="0" Outputlen="0" IMCarrier="1" />
<Submodule API="0" Subslot="0x8000" ID="0x00008000" Inputlen="0" Outputlen="0"/>
<Submodule API="0" Subslot="0x8001" ID="0x00008001" Inputlen="0" Outputlen="0"/>
<Submodule API="0" Subslot="0x8002" ID="0x00008002" Inputlen="0" Outputlen="0" />
</Module>
<Module Slot="1" ID="14">
<Submodule API="0" Subslot="01" ID="0x00000001" Inputlen="32" Outputlen="0" />
</Module>
<Module Slot="2" ID="15">
<Submodule API="0" Subslot="01" ID="0x00000001" Inputlen="0" Outputlen="32" />
</Module>
</Device>
Display More
At TiaPortal (v18) I have at slot 1 DO256 (address 18..49) and at slot 2 DI256 (18..49)..
IP addresses are of course at the same subnet.
In Proneta I see PLC as controller on Profinet and Fanuc as Device controlled by PLC.
Fanuc I/O settings:
DI:
Start number: 113
Number of bits: 256
I/O module type:PROFINET
Rack:100
Slot:1
Start Point: 1
DO:
Start number: 113
Number of bits: 256
I/O module type:PROFINET
Rack:100
Slot:1
Start Point: 1
Do you have any advice for me, please?
Thank you very much