Hi everyone, I need to connect to X6 and X301 on controller KUKA KRC4: what connectors do I have to buy? Can you give me producer an commercial code please?. Thanks in advance.
Commercial parts code for connectors X6 and X301 on kuka krc4
-
michele borsoi -
May 10, 2023 at 9:50 AM -
Thread is Unresolved
-
-
kwakisaki
May 10, 2023 at 10:31 AM Approved the thread. -
search for "wire to board power connector"
you will need to buy the connector body and contacts separately. also you will need proper type of crimper
-
Where? Please help me further, i can't find anything
-
forum is meant for resourceful types that can figure things out and do them themselves. when it comes to search:
you can use google of course.
or go to website of one of manufacturers (TE, Molex, Amphenol)
or go to website of major electronic supply chains (DigiKey, Mouser, Newark, Farnel...)
or use one of spider websites like octoparts
"wire to board power connector" is a bit wide criteria but images would help you narrow it down to a specific family. in this case you may want to check "mate-n-lock" product family.
if that is not yielding expected results, this is over your head. in this case just contact KUKA and they should be able to sell you wiring assemblies (connector, pins and wires) meant to mate with those connectors. this is of course more expensive but it is the most convenient for people without proper tool and skill.