Dear all
I have a strange problem with my IO on this controller:
It's a BX200X-C001 robot with E-Controller
I have a Profinet card with 1 port card on channel 1, in slot 1
and a 1TW-52 IO card, in slot 2
My IO communication to the PLC is working fine, but for some reason
i get the internal outputs from the 1TW card, out on the first 32 outputs
on my profinet.
In the controller the first 32 inputs are set to LOC 1-16(1), 17-32(17)
and outputs are set to LOC 1001-1016(1001), 1017-1032(1017)
Is there anywhere else i need to specify the in/outputs ?
Thanks
Holmux