I understand how to connect the software to the real robot, but how does Pallet Pro know which sensors do what? Is that something I have to do in Pallet Pro and it will carry over? I doubt the IO transfers when I serialize the robot. I am in the middle of an integration, and the IO is not connected to the robot yet. I am making real programs, but also hope to use pallet pro also. I have figured out how how to make programs in Handling Pro and transfer them. But again, I have not done anything with IO. I know the robot issn't just gonnna start palletizing just because I transferred the programs in pallet pro to the real robot. That would be awesome tho!!!
How connect real IO to Pallet Pro
-
cat91345 -
July 9, 2022 at 6:11 PM -
Thread is Unresolved
-
-
All of the I/O is set in the setup menu. You will need to assign I/O for the gripper(s), each infeed, and each pallet station.