Hello Folks,
I am having an issue with my configuration and i have no idea why. My UI is configured as 1-8 / slot 101 / rack 1 / Start 1 but for some reason when i move over to monitor all inputs shows that they are configured, See example below;
Hello Folks,
I am having an issue with my configuration and i have no idea why. My UI is configured as 1-8 / slot 101 / rack 1 / Start 1 but for some reason when i move over to monitor all inputs shows that they are configured, See example below;
It shows them as unassigned in your picture.
Looked at the PMC config data and it was apparently the one jacking up the UOP's. I reloaded the PMC_Cfg file and issue was resolved.
Thanks all for the support.