Can you test the DO by just changing the status in the TP? I am trying to debug code but concerned the hardware itself may not be wired right.
This is module A rack DOs, they are sinking I believe.
Can you test the DO by just changing the status in the TP? I am trying to debug code but concerned the hardware itself may not be wired right.
This is module A rack DOs, they are sinking I believe.
I am not certain the person wired it right or the module is functional because that is how we're turning on / off but not getting a signal. I am not in front of the module, It is an AOD16C
Are the indicator lights on the front of the module coming on when you turn the point on?
Why do you have a 1k resistor in series with your SSR?
No the lights are not coming on the module when turning on I/O point.
SSR 1K, I think he was trying to limit the current.
Can you post a picture of your setup? Both the hardware and the Digital I/O configuration screen would be helpful.