Hello all,
I am having a weird issue with my KCP display. I just put a new SSD, fresh XP and KSS 5.3.2 install onto my KRC2 cabinet (both files straight from Kuka and used on another system successfully). When the system turns on the KCP displays all the startup visuals and will also work in the BIOS, but once it goes into Windows the display goes black. I know it is still turned on because there is some damage to the LCD that only shows when it is turned on, and all the buttons work to control the robot and controller. I tried poking around the display settings in Windows and it is showing the auxiliary display card as Default and not showing any options to turn on dual display output. It should be noted with the original HDD and system software installed the KCP works fine.
Any ideas what could be causing this? Is there a setting somewhere that needs to be switched? The last robot I recommissioned the same way and had to change windows settings to get my VGA monitor working, but now it seems the other way around.
Thanks in advance for your guidance.
-Jack