Hello guys,
I have a KUKA KRC2, KR16-2 that only uses only KSD1-08 and KSD1-16;
But we bought a KSD1-48 and I need to test it out as well. It has two UVW outputs. Is it possible to test such a powerfull servodrive in a such a low payload robot? Can you guys explain to me how to test?
Thank you very much.
KSD1-48 on KR16-2
-
Gabigol -
March 5, 2021 at 2:07 PM -
Thread is Unresolved
-
-
drives up to 32A have one output port. but more than 32A would exceed rating of this connector so larger drives have two output ports which are paralleled. this allows max output current of 64A.
-
Okay, I if I use only one output, I would be able to test the KDS1-48 no problem right?
Thank you very much for your reply!