Hello everyone ,we have a ABB 1rb1400 M2000 that need a Reboot. Unfortunately we have lost the boot disc , is it possible to use boot disks from an S4C M98 ,how can we solve this issue, thanks guys
S4C Boot
-
Enio -
February 18, 2021 at 4:01 PM -
Thread is Unresolved
-
-
Please clarify if you have S4C or S4C+. The title of your post says S4C but then you wrote M2000, which is S4C+. If it is S4C+, you can get Robinstall and create boot disks. Robinstall is available on the cd which has the Robotware.
-
Hello, is S4C+ Sorry , we have nothing for this robot, can I use some think from other robots thet we have , wer can we get Robinstall?
-
Send me a PM with your e mail address and I will share from my google drive.
-
Thanks ,
*** email removed by moderator ***
*** please use conversation as stated by Lemster68 to exchange details ***
-
Hello everyone.
Hope you are all well.
I have an old ABB robot IRB6400RM with S4C and lost boot disk
Version on teach is : TPU2-000001-1.3-990505-0846
I would need to restart it.
Can someone help me?
Many thanks
-
Envie-me um PM com seu endereço de e-mail e compartilharei do meu
-
Hello Lemster68
Can you also please send me the installation of robinstall
I need to build a system for a robot S4C+
I have a robot with robotware 3HAC6811-2.10
*** email removed by moderator ***
*** please use conversation as stated by Lemster68 to exchange details ***
Thank you -
I was able to share it today. It is a newer version, it will be fine to update yours.
-
Hi Lemstar68
Thank you very much for your help
-
Send me a PM with your e mail address and I will share from my google drive.
Hello Friend,
I saw that you helped other forum members on this subject.
I really need your help. We have lost a memory card. We need a older RW version
Could You help me, please?
3HAC6811-2.18.1A 0001 System Pack 4.0
I tried 3HAC6811-2.18.1, but it is not working. We need final 2.18.1A
Thanks in advance for your help and attention. Best regards
Raimundo Neto
*** email removed by moderator ***
*** please use conversation as stated by Lemster68 to exchange details ***