I was installing a software on one of the robots at work and it asked me to auto update. I've done this procedure many times before and I did it this time to a robot that didn't have an IMG backup. The auto update failed and now the robot will not move. I have the USB stick that came with Fanuc, I read somewhere that this is an IMG backup. Here are my questions:
1. Is this information accurate? If it is, I can restore the robot so that's good news.
2. What sort of mastering will I expect to do (for sure the robot is in another position than the factory IMG backup)
3. I have an All of the Above Backup for the Robot. Will this help in any way during the process?
4. What can I do next time to avoid auto update failure? I have the auto update file in the UDI slot, and when they ask for a directory for backup, I select UTI and have another USB there. It seems to work for other robots. Why not this one?
Any help would be much appreciated, thanks!