Hi,
i do have a couple of questions if anyone can help me please:
1- currently i have an LBR iiwa 14 R820 connected through a profinet to a third party software and computer that monitors movement and reactions from the robot and errors as well. the problem is that i don't have the third party source code to control the output from the robot. what i'm trying to do is obtaining outputs for specific errors from the robot and outputting them directly to the PLC or another HMI. what kind of IO modules/card that i can buy to accomplish so and at the same time keep the existing IOs? note: i already setup the IO inside workvisual and setup the xml in sunrise.
2- i did define a user key to make the robot go home but the problem is that i don't know how to override the current running line of code so i can force the robot to go home, is there like a break command that stops the robot from what's it doing or stop the code then when i press home it will go home regardless?
3- does the smartpad for the iiwa lbr 14 r820 allow you to create a frame and an end frame? i can create frames easily but i can't create end frames or connect points together to make for example a complete movement, is there a way i can do so? i do see the magnifying glass that should points to the end frame but i don't see anything in the manual that shows how to create a complete movement like 2-3 points within one frame....like one frame that goes from point 1 to 2 then to 3 then back to 1 for example?
Thanks,
Appreciate your help