hello
I have a kuka KRC2 ,210 L150
After turning off the robot, the manual speed in T2 mode is set to 10 but i want change .
How can I change this speed, set to 30 or 50 after turning off every time?
please help me .
Adjust the manual speed in T2 mode to 30
-
km427 -
August 14, 2018 at 10:56 AM -
Thread is marked as Resolved.
-
-
That imakes no sense. When controller is powered down you cannot see or change override value.
When controller is powered, you can change mode to T2 and INITIAL override is 10% but override value can be adjusted of course can. See manual for details.
Initial override is set to 10% for safety sake. Why would you want to change it?