Hi !
I'm looking for some GSD files to implement link between KUKA robots and Siemens PLC !!
Searching for Kuka GSDML file
-
fatima -
May 2, 2018 at 12:42 PM -
Thread is marked as Resolved.
-
-
Hi I think you are not allowed to post gsd file here. However i have sent u message cheers
-
of course one is allowed to post device description files (ESI,GSD, GSDML, EDS, ...).
there is no secret know-how involved. the whole point is that device description files are shared - they are NEEDED to interface various 3rd party products into one system.
when one needs device description file, contact vendor (maker) of that product or check their website.
in case of KRC4, all of those files are maintained and distributed with WorkVisual (free download from Kuka website).if you have WorkVisual installed on your computer, device description files are in folder:
C:\Program Files (x86)\KUKA\WorkVisual 4.0\DeviceDescriptionsand if you think you are doing something that is not allowed, it is not wise to admit to it.
if something is not allowed, it will still get you banned.finally, one also need to read the manual and among other things figure out correct version of GSDML file
Siemens GSD, GSDML etc files are available for download from Siemens site (one may need to register but access is free).
Beckhoff device description files are on Beckhoff website (each vendor posts files for their products so that users can use the product)
etc.
-
I think he meant that files with .GSD extensions are not accepted by the forum software. Just image&video files, PDFs, SRC/DAT, CFG, XLS, and TXT.
(what, no XML? )
Of course, since a GSD file is just a text file with an odd extension, one could always rename it and post it under "false flag", so to speak. (and now, we need a pirate emoji....)
-
ok, that makes more sense...