Hello everyone,
I have read all the topics for IOSYS.INI configuration but I don't understand very well somethings.
I have 2 Wago modul for 4 Input, 2 Wago for 4 Output, 1 Wago for 2 analog Output.
I have setting IOSYS.INI in this mode :
[DEVNET]
;DeviceNet MACID 5
INB0=5,0,x1
OUTB0=5,0,x1
anout1=5,0,16,3,CAL32768
anout2=5,2,16,3,CAL32768
Before the installation of the analog module the Digital Input and the Digital Output worked properly, now after the installation of the Analog Output, work only the analog output, the digital input and output doesen't wrork.
Where am I doing wrong?
Thanks in advance