Hey guys. new to the community and pretty new to industrial automation. A little background: I'm just getting into my second year in robotics without any formal training. Started out as a point jockey and got pretty involved with actual higher level programming on just ABB robots. really stayed out of the cabinet and just coded for the most part. fast forward to now: i'm charged with a getting a FANUC robot up and running and I know very little about them. Currently when main power is on I see my PIL light go green. inside maincabinet, I can flip the ext. 24 and i'll see that LED illuminate on the estop board (EXT24V). problem is that is all that turns on. I've checked all my fuses and connections. Fuses all ring out and connections seemed to have been seated properly, but still re-seated for good measure. Had a much more experienced programmer come out and take a look and arrived at the same conclusion i did, which is that something on the estop board is fried. Teach pendant stays dark. fan is off. 480 is definitely coming in. 24v is coming in. right now we are at mission critical and just cant seem to catch a break. im looking for any help or tips that may get me pointed in the right direction.
Equip:
Controller is R30i
the compact cabinet.
ive included pictures of the illuminated LEDs