I need to make or buy a pig tailed cable but haven't found anything via google. Robotworx wants $800 which is much more than my customer wants to pay. Anyone?
Can someone help with a source for the 12-pin EE connector/cable on a LRMate?
-
jstolaruk -
March 18, 2017 at 1:16 PM -
Thread is marked as Resolved.
-
-
What model LR mate
-
200iC with a 30iA controller.
-
Here is the pinout I'll see if I can get the connector part number
-
Thanks Mike, much appreciated!
-
FYI Fanuc charges about $450 for just the solder type metal connector for a mate. the plastic one for full size robots is more like $40
-
That's great but can you provide a part number or source?
-
NO luck finding the part number but, Fanuc supplies one with the robot. It comes in the box with the teach pendant.
I think this is the Spec
Amphenol M23 12 Pin male -
This lrmate is reconditioned from robotworx and they don't supply one with the pendant. Thanks for looking.
-
A05B-1137-J058 *SP RDI RIGHT ANGLE CONNECTOR 127 85 In Stock
1-800-47robot #1 for spare parts
Give them your F number and they will make sure its the correct one.
-
F119278
-
When you call Fanuc at 1 800 47robot give them the F number to verify that is the correct part number
-
This bot was refurbished by Robotwrox. A call to Fanuc and they redirected me to Robotworx. Hence, the price I got in my opening statement.
-
We have this in stock with 2 meters pig tail.
It's used on M410 and R2000, looks like a 24 pins -
you need to get the place that sold it to you to relicense it to the end user.
Fanuc will sell no parts or supply any service until this is done.
when I sell a used bot, I do.... Just saying.
you can do it yourself at Fanuc, but it is not free.
I have found no cross match for the LR Mate EE connector
dmbj has the correct part number above -
FYI, the Connector that was supplied with mine is:
Hirose Electric Co.
RM15WTLP-12P(71)
Male
Pinouts
1 thru 6 - Remote In's
7 & 8 - Remote Out's
9/10 - +24V dc
11/12 - -0v -
FYI, the Connector that was supplied with mine is:Hirose Electric Co.
RM15WTLP-12P(71)
Male
Pinouts
1 thru 6 - Remote In's
7 & 8 - Remote Out's
9/10 - +24V dc
11/12 - -0vNice work.
Here is where you can buy the hirose connector:
https://www.digikey.com/product-detail…2191-ND/1473392
or
https://www.mouser.com/ProductDetail/…v83U8E9WQ%3d%3d$65 is a bit cheaper than the $450 quoted earlier in the thread.
-
Nice work.
Here is where you can buy the hirose connector:
https://www.digikey.com/product-detail…2191-ND/1473392
or
https://www.mouser.com/ProductDetail/Hirose-Electric/RM15WTLP-12P71/?qs=%2fha2pyFaduj0AgxqreAPk2RfHLVBrdGetH%2ffHd46trHv8v83U8E9WQ%3d%3d$65 is a bit cheaper than the $450 quoted earlier in the thread.
Thanks for this information. I needed one of these connectors for a Fanuc SCARA robot.
The Hirose part number RM15WTLP-12P(71) appears to be discontinued now.
The replacement number is RM15WTLP-12P(31)
More information can be found on the Hirose website:
https://www.hirose.com/en/product/p/CL0109-0997-9-71
They are out of stock at Digi-Key, but show stock at Newark and Mouser.
Here is a link for the connector at Newark. Price is $68.08