We just purchased a used ABB IRB 640 robot with flexpicker palletware software. We manufacture concrete building blocks and want to use robot to palletize concrete block from our polishing line. This is our first experience with robots and need technical help with setup and direction to get the robot operational. I think we can resolve our issues and receive the training and help via telephone. Is there anyone familiar with the robot and flexpick palletware/pallet wizard software that may be able to walk us through this installation. We would compensate for knowledge and time. Any suggestions or help
Thanks,
Ralph
ABB IRB 640 & palletware software help
-
blockhead -
December 26, 2016 at 8:11 PM -
Thread is marked as Resolved.
-
-
I think u should better contact 3rd party robot company or trainning ABB official operation curriculum course.
-
Hi Ralph,
I think it would be beneficial to have help from someone experienced and reputable that is also near you. Help over the phone can many times be tedious, slow and unproductive. A site visit could clear up many, many potential problems, especially if this is your first robot. If you give an approximate location, would be happy to recommend companies and/or individuals near you that you can contact and build a relationship with.
-
We are located in Rensselaer, NY which is across the Hudson River from Albany, NY
Thank you