TA 1900 WG Batteries

ScanRobot · April 13, 2015 at 10:20 AM

Hi All

I have a customer who has a Panasonic TA 1900 WG installed.
I have been asked if i could replace the batteries in it.
Unfortunately I do not have any manual/documentation, so i have no info on what kind of batteries are used, and where they are placed.

Anyone in here who can help ?
Usually we are working with Motoman, so the Panasonics are quite new for us.

Regards Lars
ScanRobot

vancanh2000 · April 15, 2015 at 8:46 AM

Dear You!
You can replace batteries but you need back up program and creat new progam test.I do not know : You want replace batteries for RT.UA,FA,RW,BW or TW.

ScanRobot · April 15, 2015 at 10:33 AM

I would like to replace alle batteries, so a manual would be great, telling me where the batteries are placed, and the type

achencan · April 16, 2015 at 12:43 AM

Hi, this manual is worked with TAWERS TA-1400. You can try.

ScanRobot · April 23, 2015 at 8:45 AM

Hi Robotfellas,

Thank you for the usefull replies

but....the robot has not yet lost the encoder values....

so my question is...: is it necessary to to perform encoder reset when you change batteries...or can you just replace the batteries with POWER ON.....without any further actions....?

Simon

achencan · April 24, 2015 at 12:37 AM

If the robot has not yet lost the encoder values, then just replace the batteries with POWER ON (no encoder reset).

TA 1900 WG Batteries

Advertising from our partners

Anyware Robotics is hiring!

How to see your Job Posting (search or recruit) here in Robot-Forum.com